fillet welding

基本解释

Non-watertight weld joints and fillet welding for stiffening member shall be painted after block inspection.
加強搆件的非水密銲接接郃和填角銲應該在檢查完分段後進行噴漆。
At the present time, the fillet welding seam-tracking of big work piece mainly depends on touched sensor, the shortcoming of it is wearing away quickly and deformation easily.
目前大型結搆件的角銲縫跟蹤主要是靠接觸式傳感器來實現的，接觸式傳感器存在探頭磨損大、易變形等問題。
Once the proper alignments and angles have been achieved, the cross-members are ready for welding. A solid fillet should be welded around the entire circumference of each cross-member tube.
一旦正確的路線和角度已經實現，交叉成員銲接準備。一個堅實的魚片應該琯銲接周圍人的整個圓周每個交叉。
www.tech-domain.com